The RCH8-200-3-R manual ramp is made up of two welded aluminum semi-ramps joined by a sturdy hinge across the entire width of the ramp.

Entirely made of aluminum to contain the overall weight and facilitate handling. The 5 cm high side bands increase the level of safety when loading and unloading, while the side hook allows for effective closure of the ramp when the vehicle is moving.

Two sturdy supports with screw-on metal feet with technopolymer base. The supports are installed in the center of the ramp at the hinge and the particular rocker mechanism ensures that when the ramp is opened they are positioned perpendicular to the ground; furthermore, being adjustable in height, they adapt to any use requirement.

The “almond” surface together with the “embossed” paint ensure excellent grip even on wet or dirty surfaces.

The REX8-200-4-R manual ramp is empirically tested with 2.5 times the declared load capacity, according to the most stringent standards in the field

The speed of installation is a strong point of the product because it is possible
complete it in about an hour. Only by using a normal one
drill, simply drill 8 holes on the floor of the van and fix the
ramp with the appropriate screws and bolts supplied as standard

Thanks to the gas shock absorbers installed on each model, the weight on the operator is very low and allows for easy opening and closing of the ramp, also thanks to the 4 practical handles made of a special technopolymer reinforced with glass fibre.

Two sturdy supports with screw-on metal feet with technopolymer base. The supports are installed in the center of the ramp at the hinge and the particular rocker mechanism ensures that when the ramp is opened they are positioned perpendicular to the ground; furthermore, being adjustable in height, they adapt to any use requirement.

The RME8-200-3-R manual ramp is empirically tested with 2.5 times the declared load capacity, according to the most stringent standards in the field.

It is made up of two welded aluminum semi-ramps joined by a sturdy hinge across the entire width of the ramp.

Through gas shock absorbers, installed on each model, the weight on the operator is very low and allows for easy opening and closing of the ramp, also thanks to the 4 practical handles made of a special technopolymer reinforced with glass fibre.

The side edges, 5 centimeters high, increase the level of safety when getting on and off. A pair of seat belts and the side locking hook completely secure the ramp to the van, limiting noise and vibrations and allowing movements in absolute tranquility.

Thanks to the surface made of expanded aluminum mesh, it at the same time ensures perfect friction with the rubber wheels of wheelchairs or scooters, but also of work trolleys, limiting the risk of slipping to a minimum.